Atlanta, GA
Atlanta Electrical Permit Cost
An Atlanta electrical permit is a standalone trade permit issued by the Office of Buildings to state-licensed electrical contractors.
The fee table assesses the Electrical Permit at a $150.00 base fee with a $75.00 minimum fee, and the $25.00 technology fee applies on top — the table's footnote applies it 'to each of the permit base fees'. Work must conform to the National Electrical Code as adopted under the Georgia State Minimum Standard Electrical Code.
How this fee is calculated
These are the components the schedule defines for this permit, as they applied on 2026-09-28. A component only applies to your project if its conditions match — read that column before assuming a figure. Want a figure for your own project? Estimate this fee with the permit fee calculator.
| Component | Formula | Applies when | Range |
|---|---|---|---|
| Electrical permit fee ($150.00)Permit fee | $150.00 flat fee | Every permit of this type | — |
| Technology fee ($25.00 per permit)Technology fee | $25.00 flat fee | Every permit of this type | — |
| Minimum electrical permit fee ($75.00)Permit fee | the shortfall up to the $75.00 minimum on calculated permit fee | permit fee under 7500 | — |
A real permit fee is these components added together. The department’s final calculation is the one that applies — this is the schedule it will be based on.
A worked example
Follow the arithmetic by hand. Every line is produced by the engine from the rules above, so the total cannot drift away from the schedule behind it.
Worked example
A licensed electrical contractor pulls a permit for a residential service panel upgrade and new kitchen circuits in Atlanta.
| Input | Value |
|---|---|
| Project valuation | $5,500 |
Example total
$175.00
An estimate, not an official fee. It is calculated from the published fee schedule as it applied on 2026-09-28. The permit office’s own calculation is the one that applies, and your project may fall under rules this schedule does not describe.
Fee schedule as of 2026-09-28Rules applied 2Rules considered 3
| Component | How it is calculated | Amount |
|---|---|---|
Electrical permit fee ($150.00)Permit feeCity of Atlanta fee table, MECHANICAL, ELECTRICAL & PLUMBING PERMIT FEES: Electrical Permit base fee $150.Show the working
| $150.00 flat fee | $150.00 |
Technology fee ($25.00 per permit)Technology feeCity of Atlanta fee table footnote: "A $25 Technology fee is applied to each of the permit base fees."Show the working
| $25.00 flat fee | $25.00 |
| Total | $175.00 |
Fees that do not apply here
Listed so you can see what was considered and left out, rather than wondering whether something is missing. A rule can also be left out because it is not published for this permit at all, and that is stated where it matters.
- Minimum electrical permit fee ($75.00) — This fee does not apply to the inputs provided.
Assumptions
- Calculated from 2 fee rules in effect on 2026-09-28.
- Amounts are rounded to the nearest cent, once, at the end of each component.
The Electrical Permit base fee is $150.00, which exceeds the $75.00 minimum, so no shortfall is charged. The technology fee adds $25.00. The total municipal fee is $150.00 + $25.00 = $175.00.
What is different in Atlanta
Electrical permits are required for new wiring, service upgrades and changes, panel replacements and relocations, sub-fed panels, temporary poles and trailer services. Applications are filed through the Accela Citizen portal with the contractor's Georgia electrical contractor registration and the physical address of the work. Rough-in wiring must be inspected before insulation conceals it, and power is released after final inspection.
What this figure does not include
Impact fees, utility connections and other departments’ permits are the usual omissions, and in some jurisdictions they are larger than the permit fee itself.
Not included in these figures
Georgia Power's meter and service connection charges, utility reconnection fees, and after-hours or re-inspection fees are separate items. Low-voltage work has its own row on the City's fee table (minimum $45 for the first 3,000 square feet, $1.50 per additional 1,000).
What you need before applying
- Georgia Statewide Electrical Contractor LicenseRequired
Electrical trade permits are issued to contractors holding the appropriate Georgia electrical contractor license (Class I/II unrestricted or low-voltage) registered with the City.
Common questions
Who can pull an electrical permit in Atlanta?
Electrical trade permits are issued to contractors holding the appropriate Georgia electrical contractor license (Class I or II unrestricted, or low-voltage) registered with the City of Atlanta.
Atlanta Office of Buildings trade permit requirements
What is the fee for an electrical permit in Atlanta?
The fee table assesses the Electrical Permit at a $150 base fee with a $75 minimum fee, plus the $25 technology fee that applies to each of the permit base fees.
City of Atlanta DCP fee tables
Why is the electrical minimum lower than plumbing's?
The City publishes its trade minimums directly: the MIN FEE AMT column shows $75 for electrical and $175 for plumbing and mechanical. Those are the amounts the City charges; the asymmetry is the schedule's own, not an error.
City of Atlanta DCP fee tables
When is an electrical inspection required in Atlanta?
Rough wiring must be inspected and approved before insulation and wall concealment, and a final inspection follows after fixtures, devices and panel trim are installed and the service is energized for test.
Atlanta Office of Buildings inspection sequence
Source and verification
The documents behind every figure on this page, with the dates that make them checkable.
- City websiteCityPrimary source
City of Atlanta — Getting Started with Zoning, Development & Permitting Services (DCP fee tables)
Building Permit $7 per $1,000 of Cost of Construction ($150 min); Technology Fee $25 per permit; Electrical Permit $150 base / $75 min; Plumbing Permit $150 base / $175 min. Footnote: a $25 technology fee applies to each of the permit base fees. The page names the Code of Ordinances fee schedule as the legal source.
Verification
Last verified against the official source in Sep 2026.